Preparation

Seal porous surfaces, such as woods and plaster, before applying Gilt Cream. Ensure surface is clean, dry and free from dust.

Application

Apply to the surface with a cotton cloth or small brush for intricate areas. Allow to dry for a minimum of four hours, longer if possible, and either leave matt or buff to a shine. For a better finish, we recommend applying several thin coats of Gilt Cream as opposed to one thick coat. Clean tools with white spirit.

Advice

Gilt Cream can be revived or thinned with turpentine or good quality white spirit.
Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
Remove as much of the product as possible from the tools after use. Do not dispose of residues and washing water/solvents in the sink, toilet, sewer, bin, etc., in order to avoid discharge into the environment.

Liberon Gilt Creams Colour Chart